Review: The challenge to integrate animal welfare indicators into the Life Cycle Assessment.

The transition to a more sustainable livestock sector represents one of the major challenges of our time. Life Cycle Assessment (LCA) is recognised as the gold standard methodology for assessing the environmental impact of farming systems. Simultaneously, animal welfare is a key component of livestock production and is intrinsically related to human and environmental well-being. To perform an overall on-farm sustainability assessment, it would be desirable to consider both the environmental impact and the welfare of the animals. The present work aimed to summarise and describe the methodologies adopted in peer-reviewed papers published to date, that combine animal welfare evaluation with LCA. Citations, retrieved from four bibliographical databases, were systematically evaluated in a multi-stage approach following the JBI and PRISMA scoping review guidelines. The searches identified 1 460 studies, of which only 24 were compliant with the inclusion criteria. The results highlighted how the environmental LCA was undertaken with a much more homogenous and standardised method than animal welfare assessment. When studies were grouped based on the type of animal welfare assessment performed: 16.7% used single welfare indicators, 45.8% multiple indicators, 8.3% applied existing validated protocols (i.e., TGI-200 and TGI-35L), 16.7% used non-validated protocols and 12.5% employed other methods. The papers were further classified with respect to the "5 Animal Welfare Domains Model": the most assessed domain was "environment" (90.5% of the papers%), followed by "health" (52.4%), "nutrition" (33.3%), "behavioural interactions" (28.6%) and "mental state" (9.5%). None of the studies assessed all the domains simultaneously. In addition, 66.7% of papers (n = 16) aggregated the animal welfare indicators into a final score. Within these, only four papers proposed to associate the animal welfare scores with the LCA functional unit. An overall sustainability score, calculated with several different approaches to summarise the information, was provided by 46% of the papers. In summary, despite the topic's relevance, to date, there is neither a consensus on the animal welfare assessment approach to be carried out (indicators selection and their aggregation) nor on the standardisation of an integrated animal welfare-LCA evaluation. The present review provides a basis for the development of common future guidelines to carry out a comprehensive, true-to-life and robust farm sustainability assessment.

Review: Precision livestock farming, automats and new technologies: possible applications in extensive dairy sheep farming.

Precision livestock farming (PLF) technologies are becoming increasingly common in modern agriculture. They are frequently integrated with other new technologies in order to improve human-livestock interactions, productivity and economical sustainability of modern farms. New systems are constantly being developed for concentrated farming operations as well as for extensive and pasture-based farming systems. The development of technologies for grazing animals is of particular interest for the Mediterranean extensive sheep farming sector. Dairy sheep farming is a typical production system of the area linked to its historical and cultural traditions. The area provides roughly 40% of the world sheep milk, having 27% of the milk-producing ewes. Developed countries of the area (France, Italy, Greece and Spain - FIGS) have highly specialized production systems improved through animal selection, feeding techniques and intensification of production. However, extensive systems are still practiced alongside intensive ones due to their lower input costs and better resilience to market fluctuations. In the current article, we evaluate possible PLF systems and their suitability to be incorporated in extensive dairy sheep farming as practiced in the FIGS countries. Available products include: electronic identification systems (now mandatory in the EU) such as ear tags, ruminal boluses and sub-cutaneous radio-frequency identification; on-animal sensors such as accelerometers, global positioning systems and social activity loggers; and stationary management systems such as walk-over-weights, automatic drafter (AD), virtual fencing and milking parlour-related technologies. The systems were considered according to their suitability for the management and business model common in dairy sheep farming. However, adoption of new technologies does not take place immediately in small and medium scale extensive farming. As sheep farmers usually belong to more conservative technology consumers, characterized by an average age of 60 and a very transparent community, the dynamics do not favour financial risk taking involved with new technologies. Financial barriers linked to production volumes and resource management of extensive farming are also a barrier for innovation. However, future prospectives could increase the importance of technology and promote its wider adoption. Trends such as global sheep milk economics, global warming, awareness to animal welfare, antibiotics resistance and European agricultural policies could influence the farming practices and stimulate wider adoption of PLF systems in the near future.

Calving difficulty influences rumination time and inflammatory profile in Holstein dairy cows.

Difficult calving may adversely affect dairy cow health and performance. Maternal:fetal disproportion is a major cause of dystocia. Therefore, the main objective of this study was to assess the effects of dam:calf body weight ratio (D:C) on calving difficulty, rumination time, lying time, and inflammatory profile in 25 Holstein dairy cows. Using automatic monitoring systems, we monitored behavior and production in 9 primiparous and 16 pluriparous cows between dry-off and 30 d in milk. During the same period, we collected blood samples to monitor metabolism and inflammatory profile of these cows. Calvings were video recorded to assess calving difficulty and observe the duration of the expulsive stage. After parturition, the cows were separated into 3 classes according to their D:C: easy (E; D:C >17), medium (M; 14 < D:C <17), and difficult (D; D:C <14). The cows in class D showed relatively longer labor durations (108 min vs. 54 and 51 min for classes D, M, and E, respectively) and higher calving assistance rates (50% vs. 0 and 11% of calvings for classes D, M, and E, respectively) than those in the other 2 classes. Compared with the cows in classes M and E, those in class D exhibited shorter rumination times on the day of calving (176 min/d vs. 288 and 354 min/d for classes D, M, and E, respectively) and during the first week of lactation (312 min/d vs. 339 and 434 min/d for classes D, M, and E, respectively) and maintained lower rumination values until 30 DIM (399 min/d vs. 451 and 499 min/d for classes D, M, and E, respectively). Primiparous class D cows had shorter resting times during the first week after calving compared with those in class M (8 vs. 11 h/d for classes D and M, respectively). Interclass differences were found in terms of the levels of inflammation markers such as acute-phase proteins (ceruloplasmin, albumin, retinol, and paraoxonase). Moreover, cows in class D had lower plasma levels of fructosamine and creatinine after calving. Low D:C reduced postcalving rumination time and increased inflammation grade, suggesting a lower welfare of these animals at the onset of lactation. The D:C might serve as a useful index for the identification of cows at relatively higher risk of metabolic and inflammatory disease, thus helping farmers and veterinarians improve the welfare and health of these cows.

Short communication: Characterization of molasses chemical composition.

Beet and cane molasses are produced worldwide as a by-product of sugar extraction and are widely used in animal nutrition. Due to their composition, they are fed to ruminants as an energy source. However, molasses has not been properly characterized in the literature; its description has been limited to the type (sugarcane or beet) or to the amount of dry matter (DM), total or water-soluble sugars, crude protein, and ash. Our objective was to better characterize the composition of cane and beet molasses, examine possible differences, and obtain a proper definition of such feeds. For this purpose, 16 cane and 16 beet molasses samples were sourced worldwide and analyzed for chemical composition. The chemical analysis used in this trial characterized 97.4 and 98.3% of the compounds in the DM of cane and beet molasses, respectively. Cane molasses contained less DM compared with beet molasses (76.8 ± 1.02 vs. 78.3 ± 1.61%) as well as crude protein content (6.7 ± 1.8 vs. 13.5 ± 1.4% of DM), with a minimum value of 2.2% of DM in cane molasses and a maximum of 15.6% of DM in beet molasses. The amount of sucrose differed between beet and cane molasses (60.9 ± 4.4 vs. 48.8 ± 6.4% of DM), but variability was high even within cane molasses (39.2-67.3% of DM) and beet molasses. Glucose and fructose were detected in cane molasses (5.3 ± 2.7 and 8.1 ± 2.8% of DM, respectively), showing high variability. Organic acid composition differed as well. Lactic acid was more concentrated in cane molasses than in beet molasses (6.1 ± 2.8 vs. 4.5 ± 1.8% of DM), varying from 1.6 to 12.8% of DM in cane molasses. Dietary cation-anion difference showed numerical differences among cane and beet molasses (7 ± 53 vs. 66 ± 45 mEq/100 g of DM, on average). It varied from -76 to +155 mEq/100 g of DM in the cane group and from +0 to +162 mEq/100 g of DM in the beet group. Data obtained in this study detailed differences in composition between sources of molasses and suggested that a more complete characterization could improve the use of molasses in ration formulation.

Long term results of acute Achilles repair with triple-bundle technique and early rehabilitation protocol.

BACKGROUND: The best treatment for acute rupture of the Achilles tendon is still under debate. Our purpose was to evaluate surgical triple-bundle technique in selected patients with full subcutaneous rupture of Achilles tendon. METHODS: Sixty-six consecutive patients (56 men, 10 women; age range 20-61 years) with full unilateral rupture of the Achilles tendon were surgically treated by the triple-bundle technique. Seventy-four percent of the lesions occurred during sport activity. Each patient was assessed by: (1) The American Orthopaedic Foot and Ankle Society (AOFAS) score; (2) the Leppilahti score; (3) the range of movement measurement of ankle joint; (4) ipsilateral thigh, calf, and ankle circumferences compared to the contralateral limb; (5) functional evaluation with isokinetic dynamometry of both limbs. RESULTS: 80.3% of the patients were fully satisfied (AOFAS ≥90) with treatment and resumed their previous level of sport. Concerning the outcomes, (1) the mean AOFAS score at 36 months was 93.9; (2) the mean Leppilahti score at 36 months was 91.8; (3) the mean difference in dorsiflexion and plantarflexion between the healthy side and the operated side was 4.3° and 6.9°, respectively. We observed calf muscle hypotrophy in two cases and scar complication in one. No re-ruptures occurred. Isokinetic tests performed 36 months after surgery showed a good restoration of plantarflexion. At univariate analysis AOFAS was influenced by age and difference between the healthy side and the operated side in dorsiflexion, plantarflexion, and circumference at all three levels and strenght at 60°/s. At univariate analysis, Leppilahti score confirmed the significant parameters of the AOFAS with the exception of age and difference of thigh circumference. The only predictive parameters in multivariate analysis were dorsiflexion difference (O.R. = 0.831; 95% C.I. 0.694-0.995; p = 0.044) and plantarflexion difference (O.R. = 0.777; 95% C.I. 0.631-0.958; p = 0.018). CONCLUSION: In this case series the triple-bundle technique showed a low rate of complications and good functional restore tested with isokinetic tests. For these reasons afforded by biomechanical strength test reported in literature, this technique has to be considered a valid choice for the treatment of Achilles tendon rupture in young patients with a high level of sport activity.

Elbow rehabilitation in traumatic pathology.

The elbow, intermediate joint of the upper limb, frequently undergoes to pathological events and is especially prone to stiffness. Rehabilitation plays an important role in recovering functional activities. For the rehabilitation team, this goal always represents a challenge, as the treatment has to be continuously modeled and calibrated on the needs of the individual patient, even many times during the same rehabilitation cycle. Containing the effects of immobilization, avoiding to excessively stress the healing tissues, satisfying specific clinical criteria before moving to the next rehabilitation stage, basing the rehabilitation plan on up-to-date clinical and scientific data that can be adapted to each patient and to his/her needs are the basic principles of the rehabilitation plan, which can be chronologically grouped into four rehabilitation stages. After summarizing the general principles of elbow treatment, the specific principles of rehabilitation after elbow fractures and elbow instability are presented, and then the rehabilitative approach to the most frequent and feared pathological conditions of the elbow, namely stiffness, is described.

Proposal for SICSeG guidelines for rehabilitation after anatomical shoulder prosthesis in concentric shoulder osteoarthritis.

PURPOSE: The purpose of this paper is to provide up-to-date guidelines on rehabilitation after anatomical shoulder prosthesis for concentric shoulder osteoarthritis, as previous guidelines date back to late 1970s and are no longer adequate due to the evolution of prosthesis models and surgical techniques. METHODS: The physiatric committee of the Italian Society of Shoulder and Elbow Surgery (SICSeG-Società Italiana di Chirurgia della Spalla e del Gomito) performed a search for all the existing literature related to rehabilitation after shoulder replacement. A total of 29 papers concerning shoulder rehabilitation were reviewed. In addition, the main Italian orthopedic surgeons and physiatrists dealing with shoulder surgery and rehabilitation were interviewed to obtain indications when literature was not conclusive. RESULTS: From literature evaluation and expert consultation, we produced guidelines concerning: patient evaluation by means of adequate rating scales, preoperative treatment, early intermediate and advanced postoperative phases, rehabilitation of scapulo-thoracic joint, return to work and sports, length of rehabilitation and follow-up. CONCLUSIONS: This proposal for guidelines was presented during the 11th SICSeG Congress on May 2012 and to the main scientific societies concerned in shoulder surgery and rehabilitation. A consensus conference is needed in order to formalize and make them usable from all the professional figures involved in this field.

A new kind of rehabilitation after Neer capsuloplasty: results.

The shoulder joint constitutes a sophisticated compromise between stability and movement: trauma such as dislocation and the surgery that follows to restore anatomical integrity, may cause a change in this balance, resulting in myofascial retraction, neuromotorial inhibition, and a deviation in motorial programming with the appearance of compensation. It is the purpose of this study to report the results obtained with a specific rehabilitation program in 18 patients submitted to Neer capsuloplasty to treat anterior shoulder instability. An objective and subjective study with pre-established stages, and a 12-month follow-up was done, to evaluate the results obtained based on the Rowe scale.

Anterior recurrent dislocation of shoulder treated by the Latarjet technique: our experience.

Transposition of the coracoid process in the preglenoid site according to the Latarjet method in 15 cases of anterior recurrent dislocation of shoulder is reported. Indications, surgical stages, and results are discussed with emphasis on the simplicity of surgery followed by nearly complete functional recovery and rapid resumption of professional and sports activity.

Rehabilitation treatment in cemented and cementless prostheses.

Rehabilitation after hip arthroplasty is aimed at improving the results obtained with surgery and allowing the elderly patient to resume a normal daily life as quickly as possible. The correct use of the prosthesis positively influences its duration. Full weight-bearing on the limb submitted to surgery is allowed at different times: days 7-8 if the prosthesis is cemented. When the prosthesis is cementless the proper time for full weight-bearing is established by the orthopaedist, and it is usually allowed on days 30-40. Walking initially makes use of a walker, followed by parallel, and finally antibrachial support.